Shop
Showing 433–480 of 550 results
-
Accessories, Mounts
AXIS TP1001-E Wall & Pole Mount
Wall-and-Pole Mount for Axis PTZ and multi-sensor cameras. Built-in Ethernet cable with an IP66 RJ45 connector for quick installation with protection against dust and water. Connect PoE via either RJ45 or IDC (insulation-displacement contact) connectors.
SKU: 7331021085268 -
Accessories, Mounts
AXIS TP3603 Conduit Back Box
TP3603 indoor conduit back box a complement to T94S01P at a lower price point for large indoor installations (eg data centers). Compatible with P32/M32 indoor versions as well as indoor versions of Q17/19/29, P33, Q35, and P14/M42(plate needed TP1601). TP3603 has two separate conduit entries (1/2″ & 3/4″) and has space for connectors (e.g. T86 Media Converters & T6101 I/O interface).
SKU: 7331021070967 -
Accessories, Mounts
AXIS TQ1602-E Conduit Back Box
IP66/IP67 rated outdoor back box with conduit entrance
- IP66/IP67 storage compartment for connectivity devices
- Impact resistant (IK10+) against vandalism attempts
- ¾ “ / M25 conduit interface from both side and back
- Designed for various Axis bullet cameras
Specifically designed for a several Axis bullet cameras, AXIS TQ1602-E Conduit Back Box is outdoor-ready and impact resistant (IK10+) with an ingress-protected compartment for secure storage of connectivity devices.
SKU: 7331021077034 -
Accessories, Mounts
AXIS TQ5001-E Wall & Pole Mount
Wall-and-Pole Mount for Axis PTZ and multi-sensor cameras. Built-in Ethernet cable with an IP66 RJ45 connector for quick installation with protection against dust and water. Connect PoE via either RJ45 or IDC (insulation-displacement contact) connectors.
SKU: 7331021076914 -
Accessories
AXIS TS2901 APPLIANCE STAND
Space-saving vertical appliance stand
- Designed, tested and validated for AXIS S2208 & AXIS S2212
- Robust and stable
- Easy to install
- Unobtrusive design
Save space with AXIS TS2901 Appliance Stand. AXIS TS2901 lets you install your AXIS Camera Station appliances vertically when space is limited. Screwing securely onto tables and shelves, it also protects your appliances from theft and falls. AXIS TS2901 is compatible with AXIS Camera Station S2208 Appliance and AXIS Camera Station S2212 Appliance.
SKU: n/a -
-
Accessories, Cables
AXIS TU6004-E Cable 8 M
AXIS TU6004-E Cable 8 m is a 8 m cable used for the F-series. It has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021075351 -
Accessories, Cables
AXIS TU6007-E Cable 1 M 4 Pack
AXIS TU6007-E Cable 1m 4P is a bulk pack of 4x 1m (3ft) thin cables used for the 2nd generation F-series. AXIS TU6007-E Cable 1m has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021083868 -
Accessories, Cables
AXIS TU6007-E Cable 8 M
AXIS TU6007-E Cable 8 M is a 8 M (26ft) thin cable used for the 2nd generation F-series. AXIS TU6007-E Cable 8m has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021083837 -
Accessories, Cables
AXIS TU6007-E Cable 8 M 4 Pack
AXIS TU6007-E Cable 8 m 4 Pack is a bulk pack of 4x 8m (26ft) thin cables used for the 2nd generation F-series. AXIS TU6007-E Cable 8m has rugged connectors. A FAKRA connector on one side (connecting to the F91 main units) and a SMA connector on the other side (connecting to the F21, F72 and F4105-LRE sensors).
SKU: 7331021083844 -
-
-
Accessories, Midspans
AXIS TU8004 90 W Midspan
AXIS TU8004 is a single port 90 W midspan, compliant with IEEE 802.3bt and High PoE devices. Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for powering network products. In a single network cable, a PoE midspan injects power and data to the network device with built-in PoE support. No need to replace existing Ethernet switches and cabling infrastructure.
SKU: 7331021085367 -
Accessories, Cables
AXIS TU8010 2-Port PoE Extender
AXIS TU8010 2-port PoE Extender add additional PoE ports within a system, allowing for more devices to be connected. In addition to this they also extend the length of PoE cabling that you can use by 100 meters. The new PoE extenders will enhance the ease of installation by minimizing the number of PoE ports used and the amount of cabling needed.
SKU: 7331021082571 -
Accessories, Cables
AXIS TU8011 4-Port PoE Extender
AXIS TU8011 4-port PoE Extender add additional PoE ports within a system, allowing for more devices to be connected. In addition to this they also extend the length of PoE cabling that you can use by 100 meters. The new PoE extenders will enhance the ease of installation by minimizing the number of PoE ports used and the amount of cabling needed.
SKU: 7331021082588 -
Accessories, Controls
AXIS TU9002 Joystick
AXIS TU9002 Joystick gives responsive and accurate control of all Axis PTZ cameras. It is a 3-axis joystick with a turn knob and six application-defined hotkeys. Plus, you can use AXIS TU9002 as a computer mouse. The joystick is constructed in durable materials and has a professional and modern look that adapts to a surveillance room design. It is designed for both left-hand and right-hand use and is easy to install with a USB interface.
SKU: 7331021078093 -
Accessories, Controls
AXIS TU9003 Keypad
With AXIS TU9003 Keypad, you can quickly navigate between workspaces, cameras, views, and PTZ presets. It has 10 application-defined hotkeys and 12 preset keys. It’s equipped with an LCD display allowing the operator to see, for instance, the number of the camera he or she is looking at. The keypad is constructed in durable materials that are PVC free and has a professional and modern look that adapts to a surveillance room design. It is designed for both left-hand and right-hand use and is easy to install with a USB interface.
SKU: 7331021078109
USD $
CAD $