Pelco ExSite Enhanced Explosion-Proof Thermal Bullet VGA 36mm 9Hz
Pelco ExSite Enhanced Explosion-Proof Thermal Bullet VGA 36mm 9Hz
Pelco ExSite Enhanced Explosion-Proof Thermal Bullet VGA 36mm 9Hz
Pelco ExSite Enhanced Explosion-Proof Thermal Bullet VGA 36mm 9Hz
,

Pelco ExSite Enhanced Explosion-Proof Thermal Bullet VGA 36mm 9Hz

ExSite Enhanced explosion-proof thermal bullet, VGA 640×512, 36mm, 24VAC/PoE.

$16,526.01 USD

Request a quote

The Pelco ExSite Enhanced Thermal 2 Series is a rugged explosion-proof thermal bullet camera that detects heat signatures at long range, even in total darkness, fog, smoke, or dense foliage. The EXTE2-VF36 pairs a VGA 640×512 thermal sensor with a 36mm lens. A heavy-duty AISI 316L stainless steel housing protects it in corrosive, hazardous industrial settings, and it runs on 24VAC with PoE (802.3af Class 3).

  • Explosion-proof and dust-ignition-proof thermal bullet
  • VGA 640×512 thermal sensor with 36mm lens
  • Long-range heat detection through darkness, fog, smoke, and foliage
  • Heavy-duty AISI 316L stainless steel housing
  • 24VAC power with PoE 802.3af Class 3 and Smart Analytics integration

Note: Pelco explosion-protected cameras are not eligible for advance replacement under warranty.

Available as Pelco part number EXTE2-VF36-E0A00-1.

Technical specifications

Family specifications from the official Pelco datasheet. Manufacturer part number EXTE2-VF36-E0A00-1; some values vary by model variant — see the datasheet or ask us to confirm your exact configuration.

Image Performance

Specification Value
Image Sensor 320 x 256 Uncooled VOx Microbolometer; 640 x 512 Uncooled VOx Microbolometer
Pixel Pitch 12μm
Spectral Range 8μm to 14μm
Aspect Ratio 5:4
Imaging Rate Up to 30 fps (-1 models up to 8.6 fps)
Dynamic Range -40°C to 225°C (-40°F to 437°F) [may vary based on operating temperature]
Resolution Scaling 320 x 256, can be scaled up to 640 x 512
3D Noise Reduction Filter Yes
Sensitivity NETD ≤50 mK (NETD ≤40 mK on 30 fps models when Frame Averager feature is enabled)
Image Uniformity Optimization Automatic Flat Field Correction (FFC) – Thermal and Temporal

Image Control

Specification Value
Image Compression Method H.264, H.265, Motion JPEG, Pelco Smart Compression
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Tamper Detection Yes
Privacy Zones Up to 64 Zones
Audio Compression Method Opus, G.711 PCM 8 kHz
Electronic Image Stabilization Yes

Network

Specification Value
Cabling Type CAT5
Connector RJ-45
ONVIF ONVIF® compliant with Profile S, Profile T, Profile G, and Profile M
Protocols IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv3, ICMP, DHCP,
Device Management Protocols SNMP v2c, SNMP v3

Mechanical

Specification Value
Dimensions (ØxL) Ø155.5 mm x 269.0 mm; Ø6.12" x 10.4" (dimensions without sunshield)
Weight 6,6 Kg (14,5 lbs)

Construction

Specification Value
Cable Entry One 3/4" NPT
Sunshield AISI 316L stainless steel

Electrical

Specification Value
Power Consumption 10W
Power Source VDC: 12V +/- 10%, 9W min. VAC: 24V +/- 10%, 15VA min.

Audio

Specification Value
Local Storage SD card support (Class V10 or better recommended)

Environmental

Specification Value
Operating Temperature -50 °C to +65 °C (-58 °F to 149 °F)
Storage Temperature -40°C to +70°C (-40°F to 158°F)
Humidity 10% – 95% non-condensing

Certifications

Specification Value
Safety UL/CSA 62368-1, EN/IEC 62368-1
Hazardous ATEX (EN IEC 60079-0, EN 60079-1, EN 60079-31)
C22.2NO.60079-31) ABNT NBR IEC 60079-0:2020, ABNT NBR IEC 60079-1:2016 Versão Corrigida: 2020, ABNT NBR IEC
60079-31:2014 Versão Corrigida:2021 KCs (Employment and labor department 2021-22)
Environmental and Performance EN/IEC 60529: IP66, IP67, IP68, IP69; IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-30, IEC 60068-2-52
UL50E: 4X, 6P MIL-STD-167-1A , MIL-STD 810H for N/A
Electromagnetic Emissions FCC Part 15 Subpart B Class A, IC ICES-003 Class A, EN 55032 Class A, EN 61000-6-3
Electromagnetic Immunity EN 50130-4
Vibration Test EN 50130-5, EN 60068-2-6
Approval certification Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) Electromagnetic compatibility: EN60945

Certifications

Specification Value
Warranty 3-year limited warranty. 5-year extended warranty is available.
Temperature EXTE2-VF36-E0AB0-1
EXRE2-VF09-E0AB0-1 EXTE2-QF06-E0AB0-1
EXTE2-QF18-E0AB0-1 EXRE2-VF09-E0AB0
EXTE2-VF36-E0AB0 EXTE2-QF06-E0AB0; EXTE2-QF18-E0AB0
ATEX ITS 15ATEX18330X
Ex II 2 G Ex db IIC T6…T5 Gb Ex II 2D Ex tb IIIC T85°C…T100°C Db
-60°C ≤Ta ≤ +55°C or
+65°C +80°C
IECEx ITS15.0030X Ex db IIC T6…T5 Gb
UKEx ITS21UKEX0379X
Ex II 2 G Ex db IIC T6…T5 Gb Ex II 2D Ex tb IIIC T85°C…T100°C Db; cETLus 5002689
Location America Class I Zone 1 AEx db IIC T6…T5 Gb
Zone 21 AEx tb IIIC T85°C…T100°C Db Class I Div 2 Group A,B,C,D T6…T5
Class II Div 2, Group F,G T6…T5 cETLus 5002689
Location Canada Ex db IIC T6…T5 Gb
Ex tb IIIC T85°C…T100°C Db Class I Div 2 Group A,B,C,D T6…T5
INMETRO UL-BR 16.0004X
Ex db IIC T6…T5 Gb Ex tb IIIC T85°C…T100°C Db
KCs 25-KA4BO- 0211X, 25-KA4BO-
0212X Ex db IIC T6…T5 Gb
Ts mark Ex db IIC T6…T5 Gb
The event is triggered when the scene unexpectedly changes. Radiometric Events1
time. 1 User selectable burnt-in video radiometry overlays.
Image Health Detects incremental changes in the cameras view, such as position shifts or obstructions. Notifies; users through ONVIF conformant events and summarized email reports.
Classified Object Detection Range2
EXRE2-VF09-E0AB0 EXRE2-VF09-E0AB0-1
EXTE2-VF36-E0AB0 EXTE2-VF36-E0A0B-1
EXTE2-QF06-E0AB0 EXTE2-QF06-E0AB0-1
EXTE2-QF18-E0AB0 EXTE2-QF18-E0AB0-1
Focal Length 9.2 mm
36.0 mm 6.3 mm; 18.0 mm
Angle of View (H x V) 50.0° x 40.0°
12.0° x 9.6° 34.0° x 27.2°; 12.0° x 9.6°
Detection Range 120 m
(394') 310 m
(1017’) 78 m
(256') 220 m
(722’) 2Figures in this table also apply to -1 variants of each camera.
Description NXWBS1
MHXWFWCA Parapet mounting bracket for use with EXF2230 cameras. AISI 316L stainless steel.
NXFWBT Vertical riser, 124 mm (4.9"), for use with EXF2230 cameras. AISI 316L stainless steel.
NXWTU Wall adapter module, for use with NXWBS1. AISI 316L stainless steel.
NXCOL Pole mount adapter for use with EXF2230 cameras or explosion proof washers. For pole diameters; from 110 mm (4.3") to 150 mm (5.9"). Max load 50 kg (110 lb.). AISI 316L stainless steel.
NXCW Corner mount adapter for use with EXF2230 cameras or explosion proof washers. Max load 50 kg (110; lb.). AISI 316L stainless steel.
Description EXTE2-CABLARM101
EXTE2-CABLARM41 Cabling, 4m (13.1 ft), armored cable, barrier cable gland
EAC Ex -60°C (-76°F) /
+135°C (+275°F)
Unarmored OCTEXB3/4P
20.0 mm (0.78 in)
Armored OCTEXBA3/4P
16.8 – 23.9 mm (0.66-
0.94 in) 20 mm; (0.79 in)
max 17.8 mm (0.7
EAC Ex -60°C (-76°F) /
+100°C (+212°F)
Unarmoured OCTEX3/4C
13.0 – 20.2 mm; (0.51-0.79
+80°C (+176°F)
Armored OCTEXA3/4C
16.9 – 26.0 mm (0.66-
1.02 in) 11.1 – 19.7
mm (0.44 – 0.78 in)
EAC Ex -100°C (-
148°F) / +400°C; (+752°F)
EAC Ex -60°C (-76°F) /
+80°C (+176°F)
in) Reduction 3/4" NPT x 1/2"
EAC Ex -100°C (-
148°F) / +400°C; (+752°F)
one of the following n 2x EXC2602 fixed compact cameras
Description MBX1MAA
MBX2MAA MBX3MAA
MBXMP Adapter plate for communication box to MPXCOL or MPXCW mounts. AISI 316L stainless steel housing.
MBXWRE Wrench for opening communication boxes, MBX.
MPXCOL Pole mount adapter for use with ExSite cameras. For pole diameters from 110 mm (4.3”) to 150 mm; (5.9”). Max load 50 kg (110 lb.). AISI 316L stainless steel.
MPXCW Corner mount adapter for use with ExSite cameras. Max load 50 kg (110 lb.). AISI 316L stainless steel.

Camera

Specification Value
M5 Ø 101.5
Ø 114.5 Ø 155.5; Ø 40
SKU: EXTE2-VF36-E0A00-1 Categories: , Brand:

Related products